We can supply a total-variety of energy transmission merchandise like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks. EPG has set up a full established of quality management system which is supplied with superior inspection and check tools. Excellent attention has been paid out on environmental protection and strength saving. Manufacture ODM amp OEM Nylon rack and pinion EPTs
rack and pinion EPTs is a kind of EPTs employed in complete EPTT, has been used almost each EPTT area.
The caprolactam monomer is 1st melted, and included catalyst, then poured it within moulds at atmosphere force so as to shape in distinct plastic parts, such as: Rod, plate, tube. Its mechanical properties are significantly increased than iron.Also it is significantly lighter than iron elements.
Oil EPT(green)
Oil EPT(green)is the new EPTs that deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed by HangEPT EPTs industireis firm in the later on 1980’s by EPTTing the EPTd EPT from nylacast co., ltd, uk, was the 1st genuine lubricating EPT that builds the liquid lubricant method during the processing stage, which can make its coefficient of friction is 50% reduce than the EPTT pa6 or pa66, the wear-resistance is ten times than the EPTT kinds. Oil EPT is EPTTly deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed for the components of non-self-lubrication, weighty-loading and low-pace-running, which obviously resulted in a considerable enhance in bearing existence- 5 moments that of EPTT pa6 and 25 moments that of phosphor bronze! The lubricant contained in the substance will not drain, adsorb or dry out and never demands replenishment. The uniform distribution of the lubricant during the solution ensures the constant efficiency of the areas in excess of the EPTT support existence and advancements in price of put on, sliding frictional qualities, abrasion resistance and adhere slip functionality, which are just a few of the positive aspects presented by this substance. Oil EPT has been productive in considerable enlarging the software of EPT in numerous EPTT and especially for some un-lubricated running parts.
Other casting EPT:
Oil EPT carbon (black)
Oil EPT extra carbon, has the really compact and crystal construction, which is EPT than the EPTT casting EPT in the overall performance of higher mechanical power, wear-resistance, anti-aging, EPTTresistance and so on. It is suited for creating the bearing and other dress in mechanical areas.
Oil mc901(blue)
This improved mc EPT, has putting blue color, which is EPT than EPTT pa6/pa66 in the performance of toughness, fleXiHu (West EPT) Dis.bility, exhaustion-resistance and so on. It is the ideal material of EPT, EPT bar, EPTT EPT and so on.
Mc EPT mso2(ligEPTT black)
Mc EPT added mso2 can stay the affect-resistance and exhaustion-resistance of casting EPT, as nicely as it can improve the loading capability and put on-resistance. It has a broad application in producing EPT, bearing, planet EPT, seal circle and so on.
Propertites for your reference:
| Property | Product No. | Device | MC Nylon (Natural) | Oil Nylon EPTT (Black) | Oil Nylon (Inexperienced) | MC90 (EPTT) | MCNylon MSO2(LigEPTT Black) | |
| EPT Properties | one | Density | g/cm3 | 1.fifteen | one.fifteen | one.a hundred thirty five | 1.fifteen | one.sixteen |
| two | Drinking water absorption (23 ordmCin air) | % | one.8-2. | 1.eight-2. | 2 | 2.3 | 2.4 | |
| three | Tensile strength | MPa | 89 | 75.three | 70 | 81 | 78 | |
| 4 | Tensile pressure at split | % | 29 | 22.seven | 25 | 35 | twenty five | |
| 5 | Compressive anxiety (at 2%nominal strain) | MPa | fifty one | fifty one | 43 | forty seven | forty nine | |
| 6 | Charpy effect energy (unnotched) | KJ/m two | No brak | No crack | ge50 | No BK | No split | |
| seven | Charpy impact energy (notched) | KJ/m 2 | ge5.seven | ge6.four | 4 | 3.5 | three.five | |
| 8 | Tensile modulus of elasticity | MPa | 3190 | 3130 | 3000 | 3200 | 3300 | |
| 9 | Ball indentation hardness | N/mm two | 164 | one hundred fifty | 145 | one hundred sixty | one hundred sixty | |
| ten | Rockwell hardness | – | M88 | M87 | M82 | M85 | M84 | |
rack and pinion EPTs
Manufacturing unit
Because the end of 1980’s, HangEPT EPTs industireis business has EPTTting herself on deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ing the EPT of mc EPT modification, greatly prolonged the applications in various EPTT. Basing on the mc EPT, strengthened with selection of additives throughout the reaction, these kinds of as lubricant, molybdenum disulfide, graphite EPT fiber, carbon fiber and so forth, to increase the qualities, greater overall performance of wear-resistance, corrosion-resistance, self-lubrication, vibration-absorption, sound-absorption. At the very same time, as the technics and framework of the moulds is quite basic, so that it can be made in reduce EPT, becomes the best substitutes of bronze, stainless metal, babbitt alloy, ptfe and so on.
Our advantage
1.Wealthy business expertise considering that 1988.
two.Vast prepare solution line, incXiHu (West EPT) Dis.Hu (West EPT) Dis. plastics sheet/rod/areas/accessories: MC NYLON, OIL NYLON, POM, UHMW-PE, PU,PSU,PMMA, PETP, Laptop, PTFE, PVDF, PPS, PEEK, PAI, PI, PEI ect.
three.Manufacture, design and processing provider as for every your desire.
FAQ
one.A: What is the dimensions of plastics sheet?
B:Nylon sheet:Thickness*Width*Duration:twenty-a hundred*a thousand*2000mm
UHMW-PE sheet:Thickness*Width*Duration:20-a hundred*1000*2000mm 20-a hundred*1250*3130mm twenty-one hundred*1250*4250mm
POM sheet:Width*Duration:a thousand*2000mm
2. A:Can we acquire a modest component of plastics sheet?
B: Yes,you can, if we have the measurement you call for in stock.
three. A:What shade of plastics sheet?
B: Nylon sheet: Natural,black,blue,or according to client’s requiremnet.
UHMW-PE sheet: White,black,green ,bule,yellow,or according to client’s prerequisite.
White,black
four. A:Can you manufacture the plastics merchandise as for each drawing?
B: Sure,we can.
5.A: What the precision of plastic goods according to drawing?
B: Diverse EPTT with different precision,it usually about .05-.1mm
6.A: What the technologies in generating plastics parts?
B: Various merchandise with various systems,this kind of as CNC EPTT,Extrusion,Injection
7: A:What sorts of processing EPTT do you have?
B: CNC machining cEPTTr,CNC lathes,Milling,Injection Molding EPTT,Extruder,EPTing press
